MCQ
1061. নিচের কোন উপাদান কাচের স্বচ্ছতা বৃদ্ধি করা ?
Silica
Magnesium
sodium
Alumina
ব্যাখ্যা: Explained: Silica glass-এ খুবই কম Metallic Impurity থাকে যার মধ্য দিয়ে শুধু দৃশ্যমান আলো ছাড়াও অতিবেগুনি রশ্মি এবং অবলোহিত রশ্মি চলাচল করে।
উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. নিচের কোন উপাদান কাচের স্বচ্ছতা বৃদ্ধি করে- Silica.
2. কাচে সিলিকার পরিমাণ কত 50% to 75%
3. কাচের উজ্জ্বলতা বৃদ্ধি পায় কোনটির জন্য লাইম।।
4. কাচের তাপীয় প্রসারাফ কমায় কোনটি বোরাক্স।
5. কাচ অগ্নিরোধী হয় কোনটির কারণে গটাশ।
6. কেনটির কারণে সিলিকা গলে- সোডা।
1062. The poisson's ratio for steel varies from-MES-IN—
0.22 to 0.28
0.25 to 0.33
0.31 to 0.34
0.32 to 0.42
ব্যাখ্যা: Explained.-Poisson's ratio values for different materials
Clay-0.30-0.45
Material-0.30-0.31
Stainless steel-0.27-0.30
Steel-0.21-0.26
উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. Poisson's ratio for steel within elastic limit, ranges from-0.25 to 0.33
2 Poisson's ratio for concrete - Increases with richer mixes
3. The ratio of lateral strain to axial strain of a homogeneous material, is known - Poisson's ratio
4 The value of Poisson's ratio always remains Less than one
1063. A good building stone is one which does not absorb more than....... of its weight of water after one day's immersion --
5%
15%
10%
25%
ব্যাখ্যা: Explained: A good building stone shouldn't absorb more than 5% water but stone absorbing more than 10% should be rejected.
উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. Best ballast contains stones varying in size from -2.0 cm to 5 cm
2. Ballast packed below and around the sleepers to transfer the load from sleepers to formation, generally consists of --Broken stones, Gravels, Moorum
3. The important test to be conducted on a stone used in docks and harbours is - Weight fast
4. The type of stone masonry in which stones of same height are laid in layers, is called --Course rub Ple masonry
1064. What is the example of metamorphic rock?
granite
geneiss
marble
all of these
ব্যাখ্যা: Explained-a marble is an example of a metamorphic rock: it is compoised of recrystallized carbonated minerals, most commonly calcite or dolomite.
উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. The rock formed from the solidification of molten matter (magma) is called- Ignesus rock
2. The maximum bearing capacity of soil is that of- Hard rocks
3. A solid core of rock is formed inside the cylinder in the case of- Diamond drilling
1065. Laterite is chemically classified as-
calcareous rock
argillaceous rock
silicious rock
metamorphic rock
ব্যাখ্যা: Explained-Laterite is chemically classified as Argillaceous rock Laterite is a red coloured clayey material wich forms a topsoil in tropical regions. It is hard when it is dry.
1066. Gneiss is chemically classified as-
a rock
argillaceous rock
silicious rock
none of these
ব্যাখ্যা: Explained: Gneiss is a common and widely distributed type of metamorphic rock or silicious rock. Gneiss is a faliated siliceous rock in which the coarse mineral grains. have been arranged into a banded structure.
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন
1. According to IS: 382-1963, a good aggregate should be-Chemically inert. Sufficiently strong. Hard and durable.
2. Saw dust can be rendered chemically inert by boiling it in water containing - Ferrous sulphate
3. As per ISI, rolled steel beam sections are classified Into- Five series
1067. Which on is the FM of Sylet sand (নিচের কোনটি সিলেট বালির FM)
২.০১
২.৮৭
২.৫
২.৬৫
ব্যাখ্যা: Explained: House building and research institute (HBRI)-অনুসারে সিলেট বালির সূক্ষত্য গুণাংকের মান ২.৩ হতে ২.৯ হয়ে থাকে। তবে, সাধারণত সিলেট বালির সূক্ষতা গুণাংকের মান ২.৫ ধরা হয়।
1068. The compreassive strength of granaite is –
50 to 70 MN/m²
70 to 130 MN/m²
130 to 170 MN/m²
170 to 200 MN/m²
ব্যাখ্যা: Explained: The compressive strength of granite is 750 to 1350 kg/cm² or 70 to 130 mN/m²
1069. Which of the following is an example of argillaceous rock?
kaolin
slate
laterite
all of these
ব্যাখ্যা: Explained: The rocks in which clay content is predominant are called argillaccous rock. The rocks are soft in nature and with the presence of water they can be crumbled easily some of the argillaceous rocks are shale, slate, kaolin, literate etc.
1070. ইটের স্থায়ীত্বশীলতা বৃদ্ধিও জন্য কোন উপাদান ব্যবহৃত হয়?
লাইম
ম্যাগনেসিয়াম
সিলিকা
সব গুলোই
ব্যাখ্যা: Explained Lime or Limestone): লাইম ইট পোড়ানোর সময় বিগলক হিসেবে কাজ করে এবং ইটের মাটিতে অতিরিক্ত পরিমাণে লাইয় থাকলে ইটের রং লাল থেকে হলুদ হয়।
1071. Marble is an example of –
aqueous rocks
metamorphic rock
sedimentary rocks
igneous rocks
ব্যাখ্যা: Explained:-Metamorphic rocks are formed by the metamorphism process. Some example of metamorphic rocks are slate, gneiss, schist, marble, soapstone etc.
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূন প্রশ্ন
1.The rock formed from the solidification of molten matter (magma) is called: igneous rocks.
1072. Which one is not the main consitituent of portland cement? [কোনটি পোর্টল্যান্ড সিমেন্টের প্রধান উপাদান নয়?]
Di-calcium silicate
Tri-calcium silicate
Tetra-calcium aluminorferrite
Fly ash
ব্যাখ্যা: উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. Pick up the correct statement from the following:-
A soil having pH value less than 7 is an acidic soil
2. For road pavements, the cement generally used, is- Rapid hardening cement
3. For construction of structures in sea water, the cement generally preferred to, is-Fortland-pozzolana
4. For the construction of thin R.C.C. structures, the type of cement to be avoided, is-Blast furnace slag Cement
5. The cement whose strength is a little lower than the ordinary cement during the first three months but attains afterwards the same strength, is known as Low-heat Fortland cement
1073. Granite is an example of-
aqueous rocks
sedimentary rock
metamorphic rocks
igneous rocks
ব্যাখ্যা: Explained: Granite is a hard light colored igneous rock used for building and monuments. Granite is composed mainly of quartz and feldpar with minor amounts of mica, amphiboles and other minerals.
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন
1. The predominant constituent which for strength in granite is - Quartz responsible
2. The stone whose crushing strength is maximum, is- Granite
3. The bearing capacity of granite is generally - 30 to 35 kg/cm2
4. To obtain a very high strength concrete, use very fine grained-Granite
Boul
1074. The specific gravity of stone should not, in any case, be less than-
1
1.5
2
2.5
ব্যাখ্যা: Explained:-The specific gravity of stone is 2.00-2.60 But the specific gravity of stone should not less than 2.5
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন
1. Center of buoyancy is the- Centroid of the displaced volume of fluid
2. Metacentric height is the distance between the metacentre and-Center of gravity
3. The point in the immersed body through which the resultant pressure of the liquid may be taken to act is known as-Center of pressure
4. According to the principle of buoyancy a body totally or partially immersed in a fluid will be lifted up by a force equal to - Weight of the fluid displaced by the body
5. The two important forces for a floating body are- Eusyancy, gravity
1075. Seasoning of timber is done for- (কাঠের ঋতুসহকরণ যে কারনে করা হয়-
Increase moisture content
Decrese moisture content
Decrease strength
None of the above.
ব্যাখ্যা: উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
In case of timber structures, the simple bending formula M fz may be applied for-- Rectangular beams up to 300 mm depth
2. The timber floor not spanning on the masonry wall but properly anchored to the wall gives - Loterol restraint but not rotational restraint
3. The advantage of a concrete pile over a timber pile, is-No restriction on length, No decay due to termites, Higher bearing capacity.
4. If 5 and H are strength and hardness index of a timber at 12% moisture content, the composite sleeper index, is-(S+10H)/20
5. The life of a wooden sleeper depends upon- Quality of its timber
6. Design of a timber beam in general is most critical in-Deflection
1076. ইটের উপাদান সিলিকার পরিমাণ কত? প্রখরাবাদ গ্যাস ডিস্ট্রিবিউশন-
৬০%
৫৫%
৫০%
80%
ব্যাখ্যা: Explained, ইটে সিলিকা ৫০% থেকে ৬০% এর মধ্যে থাকা বাঞ্চনীয়। সিলিকা ইটের দুমড়ানো, মুচড়ানো ও ক্রাক প্রতিহত করে। তবে অতিরিক্ত সিলিকার জন্য ইটের মাটি সংশক্তি হারিয়ে ফেলে যা ইটকে দুর্বল ও আঙ্গুর করে।
1077. Which of the following is an example of siliceious rock?
qranite
gneiss
quartzite
all of these
ব্যাখ্যা: Explained The rofcks which contain silica in predominant amont are called as siliceious rocks. Presence of a large amount of free silica makes them harden and durable. Granite, greiss, quartzite, chert, etc. are example of siliccious rocks.
উত্তর সহ কয়েকটি অনুরূপ গুরুত্বপূর্ণ প্রশ্ন
1. Percussion drilling is unsuitable in-Consolidated rocks
2. The type of pile which is driven at an inclination to resist inclined forces is known as-Eatter pile
3. The maximum bearing capacity of soil is that of- Hard rocka
4. Pick up the correct statement from the following :
Sandmists of course particles of silica formal due to the Jisintegration frocks
1078. ৬৩% লাইমের মিশ্রণ থাকে কোন সিমেন্টে?
ক্লে সিমেন্ট
কুইক সেটিং সিমেন্ট
পোর্টল্যান্ড সিমেন্ট
কনভার্টেড সিমেন্ট
ব্যাখ্যা: Explained: বিশুদ্ধ চুনাপাথর সাথে সঠিক অনুপাত মৃত্তিকা মিশ্রিত করে মিশ্রণকে কাচিক হবার প্রারম্ভিক তাপমাত্রার পুড়িয়ে এবং উৎপন্ন ক্লিংকারকে মিহি পাউডারে চূর্ণ করে কৃত্রিম লাইমের মিশ্রণে থাকে।
1079. capilley rise will be greater in gravel--
fine sand
silt
course
sand
ব্যাখ্যা: Explained: মোটা দানার মাটি হতে সূক্ষ দানার মাটি ক্ষেত্রে কৈশিক উচ্চতা বেশী হয়।
1080. নিচের কোনটি সিমেন্টের মূল উপাদান নয়--
Fly ash
Di-Calcium silicate
Tri-Calcium Silicate
Tri-Calcium Aluminate
ব্যাখ্যা: Explained:- Cement তৈরির চারটি মূল উপাদান-
1. Tri-Calcium silicate
2. Di-Calcium Silicate
3. Tri-Calcium Siljeste
4. Tetra-Calcium Aluminate
উত্তর সহ কয়েকটি অনুরুপ গুরুত্বপূর্ণ প্রশ্ন
1. নিচের কোনটি সিমেন্টের মূল উপাদান নয়- Fly ash.
2. কোনটি Cement এর খনিজ উপাদান Tri-Calcium Silicate, Di-Calcium Silicate, Tri-Calcium Aluminate, Treta-Calcium Alumino Ferite, Calcium Sulfate.
3. Cement এ ক্যালসিয়াম সালফেট এর পরিমাণ কত- 3%.
4. Cement এ Tri-Calcium silicate এর পরিমাণ কত- 50%.
5. Cement Di-Calcium silicate এর পরিমাণ কত- 25%.