MCQ
661. Nickel in steel—
improves wear resistance, cuttinability and toughness
refines grain size and produces les tendency to carburisation, improve corrosion and heat resistant proper ties
improves cutting ability and reduce hardenability
gives ductility, toughness, tensile strength and anti-corrosion property
662. Eutectoid steel contains following percentage of carbon—
0.02%
0.3%
0.63%
0.8%
663. Following elements have face-centred cubic structure—
gamma iron (910° to 1400°C), Cu, Ag, Au, Al, Ni, Pb, Pt
Mg, Zn. Ti. Zr, Br, Cd
a iron (below 910°C and between1400 10 1539°C), W
all of the above
664. The basic constituents of Hastelloy are--
aluminium, copper etc.
nickel, molybdenum etc.
nickel, copper, etc
all of the above
665. Nodular iron has--
high machinability
low melting point
high tensile strength
all of the above.
666. Austenite is a combination of--
ferritc and cementite
cementite and gamma iron
ferrite and austenite
ferrite and iron graphite
667. Grey cast iron--
contains 1.7 to 3.5% carbon in free state and is obtained by the slow cooling of molten
is also known as chilled cast iron and is obtained by cooling rapidly. It is almost non-machinable
is produced by annealing process. It is soft, tough and easily machine metal
is produced by small additions of magnesium (or cerium) in the ladle. Graphite is in nodular or spheroida form and is well dispersed throughout the material
668. Ductile cast iron—
contains 1.7 to 3.5% carbon in free state and is obtained by the slow cooling of molten cast iron
is also known as chilled cast iron and is obtained by cooling rapidly. It is almost non-machinable
is produced by annealing process. It is soft, tough and easily machined metal
is produced by small additions of magnesium (or creium) in the ladle Graphite is in nodular or spheroidal form and is well dispersed throughout the material
669. The percentage of carbon in low carbon steel is—
0.05%
0.15%
0.3%
0.5%
670. The transistor is made of--
silver
gold
copper
germanium
671. Basic constituents of Monel metal are--
nickel, copper
nickel, molybdenum
zinc, tin, lead
nickel, lead and tin
672. Steel containing 0.8 to 1.5% carbon is known as—
mild steel
medium carbon
dead mild steel
high carbon steel
673. Solder is an alloy consisting of--
tin, antimony, copper
tin and lead
tin and copper
lead and zinc
674. Inconel is an alloy of--
nickel, chromium and iron
nickel, copper
nickel, chromium
nickel, zinc
675. The correct composition of Babbit metal is—
87.75% Sn, 4% Cu, 8% Sb. 0.25% Bi
90% Sn, 2% Cu, 4% Sb. 2% Bi, 2% Mg
87% Sn, 4% Cu, 8% Sb, 1% Al
82% Sn, 4% Cu, 8% Sb, 3% Al. 35% Mg
676. Machining properties of steel are improved by adding--
sulphur, lead, phosphorous
silicon, aluminium, titanium
vanadium, aluminium
chromium, nickel
677. A steel alloy containing 36% nickel is called--
stainless
invar
high speed steel
heat resenting steel
678. Duralumin contains—
94% aluminium, 4% copper and 0.5% Mn. Mg. Si and Fe
10% aluminiunt and 90% copper
90% magnesium and alumunium with some copper
92.5% aluminium, 40% copper, 2%, nickel, and 1.5% Mg
679. The percentage carbon content in wrought iron is about--
0.02
0.2
0.1
0.4
680. Cobalt in steel—
improves wear resistance, cuttinability and toughness
refines grain size and produces les tendency to carburisation, improve corrosion and heat resistant proper ties
improves cutting ability and reduce hardenability
gives ductility, toughness, tensile strength and anti-corrosion property