MCQ
341. The natural drying of bricks is also called back drying.
true
false
342. The fuel generally used for burning limestone is
coalur
firewood
charcoal
any one of these
343. The frog of a brick is normally made on its-
longer face
bottom face
shorter face
top face
ব্যাখ্যা: ব্যাখ্যা: ইটের যে-কোনো একপাশে খোদাইকৃত বা কোম্পানির নাম সংবলিত অংশকে ফ্রগ বলে।
344. The percentage of alumina in a good brick clay should vary from-
20 to 30%
30 to 40%
40 to 50%
50 to 60%
345. The commonly used lime in white washing is---
quick lime
fat lime
lean lime
hydraulic lime
346. Lime occurs in a free state in nature.
True
False
347. The compressive strength of paving bricks should not be less than-
20 MN/m²
30 MN/m²
40 MN/m²
50 MN/m²
348. দুটি বালির নমুনার ওজন ও FM যথাক্রমে 500 গ্রাম ও 750 গ্রাম এবং 2.5 ও 2.2 হলে তাদের Combined FM কত হবে? [BPSC-20]
2.4
2.38
2.42
2.32
ব্যাখ্যা:
ব্যাখ্যা: Combined, FM=(F1m1+F2m2)/(m1+m2)
=(500*2.5+750*2.2)/(500+700)
=2.32
349. The compressive strength of perforated bricks should not be less than-
4 MN/m²
5 MN/m²
6 MN/m²
7 MN/m²
350. The cementing property in cement is mainly due to---
lime
silica
iron oxide
alumina
351. The burning of bricks in kilns is completed within-----hours.
12
24
48
96
352. For one cubic metre of brick masonry, the number of bricks required is-
400
450
500
550
ব্যাখ্যা: [Note: মেট্রিক ইট 500টি লাগে।
353. For the construction of retaining walls, a------stone must be used.
soft
hard
heavy
light
354. The silica in Portland cement should be
10 to 20%
20 to 25%
25 to 40%
40 to 60%
ব্যাখ্যা: ব্যাখ্যা: ১। ক্যালসিয়াম অক্সাইড (CaO)..........63%
২। ম্যাগনেশিয়াম অক্সাইড (MgO)..........2%
৩। সিলিকা (SiO₂)..........22%
৪। অ্যালুমিনা (Al2O3)..........7%
৫। আয়রন অক্সাইড (Fe2O3)..........3%
৬। সালফার ট্রাই-অক্সাইড (SO3).........2%
৭। ক্ষারকীয় পদার্থ...........1%
........ মোট 100%
355. The amount of gypsum usually added in the manufacture of cement is-
0.5 to 1%
3 to 5%
1 to 3%
0.1 to 0.5%
356. The main constituent of Portland cement is-
lime
iron oxide
alumina
alkalies
357. The average out-turn of first class bricks in kiln burning is-
50 to 60%
60 to 70%
70 to 80%
80 to 90%
358. The size of mould for bricks should be---- the specified size of the bricks.
equal to
double
smaller than
larger than
359. The average out-turn of first class bricks in clamp burning is about-
50%
60%
70%
80%
360. ASTM No. 16 সিভের ওপেনিং সাইজ কত মিমি? [BWDB-20]
১.১৮ মিমি
১.৪০ মিমি
২.৩৬ মিমি
১.৭০ মিমি
কোনোটিই নয়
ব্যাখ্যা: ব্যাখ্যা: ASTM No.-4 size seive-এর Opening 4(4.75mm), No. 6(3.35), 8(2.36mm), 10(2.00mun), No.
12(1.70mm), 16(1.18mm)/