Image
MCQ
961. The Newton's law of resistance is based on the assumption that the--
Planes of the body are completely smooth
Space around the body is completely filled with the fluid
Fluid particles do not exert any influence on one another
All of the above
962. The force exerted by a moving fluid on an immersed body is directly proportional to the rate of change of momentum due to the presence of the body. This statement is called---
Newton's law of motion
Newton's law of
Possess surface tension
all the above properties
964. When a cylindrical vessel containing liquid is resolved, the surface of the liquid takes the shape of--
A triangle
A paraboloid
An ellipse
None of these
966. The solvent used in cement paint is (সিমেন্ট পেইন্ট ব্যবহৃত দ্রাবক)
trupentine
water
spirit
kerosene
967. Fluid is a substance that---
Always expands until it fills any container
Has the same shear stress at a point regardless of its motion
Cannot remain at rest under action of any shear force
Cannot be subjected to shear forces
968. নিচের কোনটি পাতন করে তলানি হিসাবে পিচ পাওয়া যায়-
টার
অ্যাঙ্কান্ট
বিটুমিন
ইমালশন
969. Coefficient of velocity is defined as the ratio of--
Actual velocity of jet at vena contracta to the theoretical velocity
Area of jet at vena contracta to the area of orifice
Actual discharge through an orifice to the theoretical discharge
None of the above
972. Liquids---
Cannot be compressed
Occupy definite volume
Are not affected by change in pressure and temperature
None of the above
973. When a plate is immersed in a liquid parallel to the flow, it will be subjected to a pressure that if the same plate is immersed perpendicular to the rоw?
Less than
More than
Equal to
None of these
974. কাঁচ তৈরির প্রধান উপাদান কোনটি?
সোডা
বালি
ম্যাগনেসিয়াম
সব গুলোই
975. For manometer, a better liquid combination is one having---
Higher surface tension
Lower surface tension
Surface tension is no criterion
High density and viscosity
976. An opening in the side of a tank or vessel such that the liquid surface with the tank is below the top edge of the opening, is called--
Weir
Notch
Orifice
None of these
977. An object having 10 kg mass weighs 9.81 kg on a spring balance. The value of 'g' at this place is ---
10 m/sec^2
9.81 m/sec^2
9.75 m/sec^2
9 m/sec
978. Gypsum is added in the manufacture of Portland cement in order to (পোর্টল্যান্ড সিমেন্ট জিপসাম যোগ করার কারণ)
shorten the setting time of cement
lengthen the setting time of cement
decrease the burning temperature
decrease the grinding time
980. The property of fluid by virtue of which it offers resistance to shear is called-
Surface tension
Adhesion
Cohesion
Viscosity