Image
MCQ
407. Due to battering action of wheels over the end of the rails, the rails get bent down and are deflected at ends. These rails are called--
Roaring rails
Hogged rails
Corrugated rails
Buckled rails
410. Flat mild steel bearing plates are used--
For points and crossings in the lead portion
With wooden sleepers at locations where creep is likely to be developed
On all joints and curves
all the above
411. সাধারণত কংক্রিটের কাঠামোর শতকরা কত ভাগ পূরক পদার্থ দ্বারা পূরণ করা হয়?
৬০-৬৫ভাগ
৭০-৭৫ ভাগ
৮০-৮৫ ভাগ
৯০-৯৫ ভাগ
414. মোটাদানার পুরক পদার্থ সাধারণত কত নং চালুনী দ্বারা অতিক্রম করে না?
৪ নং চালুনি
৬ নং চালুনি
৮ নং চালুনি
১৬ নং চালুনি
418. The purpose of providing fillet in a rail section is to--
Increase the lateral strength
Increase the vertical stiffness
Avoid the stress concentration
Reduce the wear
419. Flange-way clearance is the distance--
Between the adjoining faces of the running rail and the check rail near the crossing
Between the gauge faces of the stock rail and the tongue rail
Through which the tongue rail moves laterally at the toe of the switch
None of the above