EC
Engineering Classroom
by Himalay Sen

Exams

Prepare for your next test with our collection of exam-based practice sets and question banks designed for effective assessment and revision.

Board Questions

Access past board exam questions organized by year and subject to help you understand patterns, improve preparation, and boost your exam performance.

MCQ
7481. স্টেইনলেস স্টিল নিম্নের কোনটির অ্যালয়?
আয়রন, ক্রোমিয়াম এবং নিকেল
আয়রন ও নিকেল
আয়রন, নিকেল এবং মলিবডেনাম
আয়রন, ক্রোমিয়াম এবং মলিবডেনাম
ব্যাখ্যা: Stainless steel is an iron and chromium alloy. While stainless must contain at least 10.5% chromium, the exact components and ratios will vary based on the grade requested and the intended use of the steel. Other common additives include-Nickel.
7482. পলিইথিলিন উৎপন্ন হয়-
কন্ডেসেশন পলিমারাইজেশন দ্বারা
এডিশন পলিমারাইজেশন দ্বারা
ইথিলিন মনোমারের কো-পলিমারাইজেশন দ্বারা
ট্রানজিস্টর
ব্যাখ্যা: এডিশন পলিমারাইজেশন দ্বারা পলিইথিলিন উৎপন্ন হয়।
7483. নিওপ্রিন হলো-
প্লাস্টিক
রাবারের মতো প্লাস্টিক
রাবার
প্লাস্টিকের মতো রাবার
ব্যাখ্যা: Neoprene is a very pliable rubber like material with insulating properties similar to ruber or other solid plastics.
7484. ফেরাইটস কোন ধরনের ম্যাটেরিয়াল?
ফেরো-ম্যাগনেটিক
অ্যান্টি ফেরো-ম্যাগনেটিক
ফেরি-ম্যাগনেটিক
অ্যান্টি ফেরি-ম্যাগনেটিক
ব্যাখ্যা: ফেরাইট (Fe:O₁₄) ফেরো চৌম্বকত্বের শ্রেণিভুক্ত একটি পদার্থ। এ ধরনের পদার্থে দুটি ভিন্ন ধরনের আয়ন থাকে। আয়নসমূহের চৌম্বক মোমেন্ট প্রতি সমান্তরালে থাকে কিন্তু মান সমান নয়। এ ধরনের পদার্থকে ফেরি-চৌম্বক বলে।
7485. পলিপ্রোপাইলিনের মনোমার হলো-
মিথেইন
ইথেইন
প্রোপাইলিন
পলিথিন
ব্যাখ্যা: Polypropylene is a thermoplastic 'addition polymer made from the combination of Propylene monomers.
7486. প্লাস্টিকের ইন্টারফেসিয়াল বৃদ্ধি করে তাদের-
ম্যাগনেটিক প্রপার্টিজ
উচ্চ ফ্রিকুয়েন্সিতে পাওয়ার শোষণ
ইলেকট্রিক্যাল কন্ডাকটিভিটি
পারমিটিভিটি
ব্যাখ্যা: Polystyrene (CaHg)n is a synthetic aromatic hydrocarbon Polymer made from the monomer known as styrene. Polystyrene can be solid or foamed. Polystyrene is clear, hard and brittle. It is an inexpensive resin per unit weight.
7487. পলিস্টেরিন হলো একটি-
এস্টার
হাইড্রো-কার্বন
অ্যাকাইল-হ্যালাইড
ইথেইন
ব্যাখ্যা: Polystyrene is a polymer made from the monomer styrene, a liquid hydrocarbon that is commercially manufactured from petroleum.
7488. মাইল্ড স্টিলে কার্বনের পারসেন্টেজ হলো-
2-4.5%
0.5-1.4%
0.15-0.3%
0.25-0.95%
ব্যাখ্যা: Carbon content steel is classified into following categories: (i) Dead steel = <0.15% (ii) Mild steel = 0.15-0.3% (iii) Medium carbon steel = 0.3-0.8% (iv) High carbon steel = 0.8-1.5%
7489. পিভিসি-র কো-ইফিসিয়েন্ট অব এক্সপানশন স্টিলের কো-ইফিসিয়েন্ট অব এক্সপানশনের কত গুণ বেশি?
1/4 গুণ
2 গুণ
5 গুণ
10 গুণ
ব্যাখ্যা: The thermal expansion of PVC co-efficient of expansion is therefore about 5 times that of steel.
7490. নিম্নের কোন পদ্ধতিটি আইসোমরফস?
বিসমাথ-টিন
কপার-নিকেল
আয়রন-ভ্যানাডিয়াম
লাইন ডিফেক্ট
ব্যাখ্যা: The copper-nickel system is a good example of an isomorphous system. Both copper and nickel have an fcc crystal structure.
7491. পাইপ জয়েন্টের জন্য ব্যবহৃত সিলিং টেপ প্রধানত তৈরি হয়-
ABS দ্বারা
টেফলন দ্বারা
PVC দ্বারা
এপক্সি রেসিন দ্বারা
ব্যাখ্যা: Taflon tape is commonly used in plumbing for sealing pipe threads. Thread seal tape lubricates allowing for a deeper seating of the threads and it helps prevent the threads from seizing when being unscrewed.
7492. যে তাপমাত্রায় একটি ম্যাটেরিয়াল গ্লাসি-সলিড হয়, তাকে বলা হয়-
মেল্টিং টেম্পারেচার
রিক্রিস্টালাইজেশন টেম্পারেচার
গ্লাস ট্রানজিশন টেম্পারেচার
ফ্রিজিং টেম্পারেচার
ব্যাখ্যা: গ্লাস ট্রানজিশন টেম্পারেচার দ্বারা গ্লাস সলিড হয়।
7493. ম্যাগনেটিক রেকর্ডিং টেপ তৈরি হয় সাধারণত-
আয়রনের ক্ষুদ্র ক্ষুদ্র কণা হতে
সিলিকন আয়রন হতে
সিলিকন অক্সাইড হতে
ফেরিক অক্সাইড হতে
ব্যাখ্যা: Magnetic recording tape is most commonly made from ferric oxide (FeO)
7494. গৃহস্থালি কাজে ব্যবহৃত সাধারণ গ্লাস হলো-
সোডালাইম গ্লাস
বোরো-সিলিকেট গ্লাস
হাই-সিলিকা গ্লাস
অ্যালুমিনিয়াম
ব্যাখ্যা: Soda-lime glass, most common form of glass produced. It is composed of about 70% silica (silicon dioxide), 15% soda (sodium oxide) and 9% lime (calcium oxide) will much smaller amounts of various other compounds.
7495. গ্লাসের প্রধান উপাদান হলো-
Al2O3
SiO2
B2O3
Si2O3
ব্যাখ্যা: In typical soda-lime-silica glass the former is silica silicon dioxide (SiO2) in the form of sand.
7496. সিরামিক ইন্সুলেটরে নিম্নের কোনটির উন্নতির জন্য চকচকে প্রলেপ ব্যবহৃত হয়?
ইলেকট্রিক্যাল প্রপার্টিজ
ইলেকট্রো-মেকানিক্যাল প্রপার্টিজ
মেকানিক্যাল প্রপার্টিজ
কেমিক্যাল প্রপার্টিজ
ব্যাখ্যা: The important mechanical properties required are high abrasion resistance and hardness, good compressive strength etc.
7497. সাধারণ গ্লাসের স্ট্রাকচার হলো-
আংশিক ক্রিস্টালাইন
পরিপূর্ণ ক্রিস্টালাইন
অ্যামরফস
ইথেইন
ব্যাখ্যা: Glasses do not exhibit the ordered crystalline structure of most other ceramics but instead have a highly disordered amorphous structure. Pure silica can be mode to exist as a glass and is called fused silica.
7498. একটি ম্যাটেরিয়ালের ক্রিস্টাল স্ট্রাকচার পর্যবেক্ষণ করা যায়-
ইলেকট্রন মাইক্রোস্কোপ দ্বারা
এক্স-রে ডিফ্রেকশন দ্বারা
ইলেকট্রন প্রোব এক্স-রে মাইক্রো- অ্যানালাইজার দ্বারা
ব্যাখ্যা: X-ray diffraction analysis (XRD) is a technique used in materials science to determine the crystallographic structure of a material.
7499. নিম্নের কোন পলিমারটি ক্রিস্টালাইন?
পলিমিথাইল মেথাক্রাইলেট
পলিভিনাইল ক্লোরাইড
পলিভিনাইলিডেন ক্লোরাইড
পলিইথিলিন
ব্যাখ্যা: Polyethylene is a partially crystalline solid whose properties are highly dependent on the relative content of the crystalline phase and amorphous phase.
7500. নিম্নের কোনটি উৎপাদনের জন্য চায়না-কে প্রধান কাঁচামাল?
পোরসেলিন
গ্লাস
ফায়ার-ক্লে রিফ্র্যাকটরি
স্ট্রেস
ব্যাখ্যা: Porcelain is an excellent and very practical material for microwave or over dishes because it distributes the heat through the elements evenly. It is used made by china clay.