MCQ
3881. The cementing property in cement is mainly due to---
lime
silica
iron oxide
alumina
3882. For the construction of retaining walls, a------stone must be used.
soft
hard
heavy
light
3883. The frog of a brick is normally made on its-
longer face
bottom face
shorter face
top face
3884. The amount of gypsum usually added in the manufacture of cement is-
0.5 to 1%
3 to 5%
1 to 3%
0.1 to 0.5%
3885. The average out-turn of first class bricks in clamp burning is about-
50%
60%
70%
80%
3886. The main constituent of Portland cement is-
lime
iron oxide
alumina
alkalies
3887. The commonly used lime in white washing is---
quick lime
fat lime
lean lime
hydraulic lime
3888. The natural drying of bricks is also called back drying.
true
false
3889. The percentage of alumina in a good brick clay should vary from-
20 to 30%
30 to 40%
40 to 50%
50 to 60%
3890. The fuel generally used for burning limestone is
coalur
firewood
charcoal
any one of these
3891. For one cubic metre of brick masonry, the number of bricks required is-
400
450
500
550
3892. The compressive strength of perforated bricks should not be less than-
4 MN/m²
5 MN/m²
6 MN/m²
7 MN/m²
3893. The average out-turn of first class bricks in kiln burning is-
50 to 60%
60 to 70%
70 to 80%
80 to 90%
3894. The size of mould for bricks should be---- the specified size of the bricks.
equal to
double
smaller than
larger than
3895. দুটি বালির নমুনার ওজন ও FM যথাক্রমে 500 গ্রাম ও 750 গ্রাম এবং 2.5 ও 2.2 হলে তাদের Combined FM কত হবে? [BPSC-20]
2.4
2.38
2.42
2.32
3896. The burning of bricks in kilns is completed within-----hours.
12
24
48
96
3897. Lime occurs in a free state in nature.
True
False
3898. The silica in Portland cement should be
10 to 20%
20 to 25%
25 to 40%
40 to 60%
3899. The compressive strength of paving bricks should not be less than-
20 MN/m²
30 MN/m²
40 MN/m²
50 MN/m²
3900. ASTM No. 16 সিভের ওপেনিং সাইজ কত মিমি? [BWDB-20]
১.১৮ মিমি
১.৪০ মিমি
২.৩৬ মিমি
১.৭০ মিমি
কোনোটিই নয়