Image
MCQ
28701. With the moisture content of 5 to 10% by weight, the bulking of sand is increased by-
20%
30%
40%
50%
28703. The resistance of an aggregate to wear is known as-
shear value
crussing value
abrasion value
impact value
28704. If the slump of concrete mix is 70mm, its workability is considered to be-
very low
low
medium
high
28705. ১২ মিমি ব্যাসের Reinforcement bar- এর প্রতি মিটারের ওজন কত? [BPSC-22]
০.৯১২ কেজি
০.৮৮৮ কেজি
০.৭৯৮ কেজি
০.৭৫৮ কেজি
28706. The concrete mix is said to be in workability if it has-
compatibility
movability
stability
all of these
28707. If the fineness modulus of sand is 3, then the sand is graded as-
very fine sand
medium sand
medium sand
coarse sand
28708. নিচের কোনটি খনিজ পদার্থ? [BGFCL-21]
গ্রানাইট
কোয়ার্টাজ
ডায়ানাইট সবকয়টি
কোনোটিই নয়
28709. The workability of concrete can be improved by adding-
hydraulic line
calcium chloride
flyash
all of these
28710. নিচের কোনটি ভালো ইটের বৈশিষ্ট্য?
ইট কিছুটা overburnt হলে
ইটের ওজন প্রতিটি ৬ পাউন্ড হলে
আকার, আকৃতি, রং এবং শক্তি সঠিক হলে
কোনোটিই নয়
28711. The resistance of an aggregate to the effect of hydration weather is called- of cement and weather is called-
crussing value
impact value
abrasion value
soundness
28712. The value of fineness modulus for fine sand may range between-
1.1 to 1.3
1.6 to 2.2
1.3 to 1.6
2.2 to 2.6
28713. ভবন কাঠামোতে Concrete প্রধানত কী ধরনের চাপ বহন করে?[BPSC-22]
Compression
Tension
উভয় প্রকারের
কোনোটিই নয়
28714. Masonry Construction-এর জন্য Standard Brick-এর মাপ কত? [BPSC-22]
10”x2 3/4” x41/2”
9 1/2”x2 3/4” x41/2”
8 1/2”x3 1/2” x4 1/2”
11"x 3"x 4 1/2"
28715. The rule of water cement ratio was established by-
Duff Abram
W. Simms
Plowman
Dr. Karl Terzaghi
28716. ১ মিমি পুরু ১০০ বর্গমিটার এমএস প্লেইন শিটের ওজন কত?[BPSC-22]
৬৮৫ কেজি
৭০০ কেজি
৭৮৫ কেজি
৮৮৫ কেজি
28717. M35 গ্রেডের কংক্রিটের Water-cement ratio-এর আদর্শ মান কত?[BPSC-22]
৪৫%
80%
৫০%
২৫%
28718. এক ঘনমিটার কত ঘনফুটের সমান?[BPSC-22]
৩৬.৩১৫ ঘনফুট
৩৭.৫০৫ ঘনফুট
৩৫.০২০ ঘনফুট
৩৫.৩১৫ ঘনফুট
28719. The resistance of an aggregate to b compressive force is known as-
crushing value
abrasion value
impact value
none of these
28720. The sum of percentages of all deleterious materials in the aggregate shall not exceed--
5%
15%
10%
20%