MCQ
21. Which of the following is 'not' an advantage of the usage of pattern in a casting of metals?
Using patterns to cast objects, less time is consumed for mass production
It is cost efficient and profitable for mass production
Production of the pattern requires extra effort to cast the object
Cores in the pattern could be used to decrease the amount of machining done for making cavities
22. কোনটি পরোক্ষ খরচ?
বিশেষ ধরনের নকশা খরচ
যন্ত্রপাতি বা যন্ত্রাংশ ভাড়া খরচ
পরিবহন খরচ
বিদ্যুৎ বিল
23. প্রত্যক্ষ খরচ কোনটি?
কারখানা ভাড়া
বিজ্ঞাপন খরচ
বিক্রয় ও বিলি খরচ
পরিবহন খরচ
24. The quality of the final product is not dependent on -
Method of withdrawal of pattern
Allowance provided to the pattern
The complexity of the casting
The metal used in casting
25. LIFO--
Last Out, Fast In,
Last In, First Out
কও খ উভয়ই
কোনোটিই নয়
26. ব্যয় হিসাবের উপাংশ কয়টি?
২টি
৪টি
৩টি
৫টি
27. What will be the machining allowance for a bore of a 405mm cast iron object to be casted?
1.0mm
2.0mm
3.0mm
5.0mm
28. What is the maximum temperature allowed to be given to the injection molding process?
300°C
320°C
350°C
400°C
29. In an automobile engine, up to what percent of parts are manufactured by casting?
65%
75%
80%
90%
30. A draft allowance is provided to-
All linear faces
Only the interior dimensions
Only the exterior dimensions
Only the dimensions that are perpendicular to the parting plane
31. প্রত্যক্ষ মালের শতকরা হারের সূত্রটি লেখ।
প্রত্যক্ষ মাসের শতকরা হার= আনুমানিক উপরি খরচ/ আনুমানিক মূল্য ব্যয় x১০০
প্রত্যক্ষ মাসের শতকরা হার= আনুমানিক উপরি খরচ/ আনুমানিক প্রত্যক্ষ শ্রমঘন্টা x ১০০
প্রত্যক্ষ মাসের শতকরা হার= আনুমানিক উপরি খরচ/আনুমানিক প্রতাক্ষ মালের ব্যয় x১০০
প্রত্যক্ষ মাসের শতকরা হার= অনুমানিক কারখানার উপরি খরচ/আনুমানিক প্রত্যক্ষ মজুরি x১০০
32. What is a function of a riser in a sand casting?
Provide good mobility to the molten metal
Prevent cavities due to shrinkage
To develop holes or hollow cavities in the casting
To provide differential cooling rates in specific areas of the casting
33. স্থায়ী খরচ কী?
যে খরচ উৎপাদনের পরিমাণের অনুপাতে কমবেশি হয়
উৎপাদনের পরিমাণ কম বা বেশি হলেও যে খরচের পরিবর্তন হয় না
কোনো প্রতিষ্ঠানের অফিস ও প্রশাসন বাবদ যে ব্যয় হয়
কোনোটিই নয়
34. স্থায়ী খরচ কোনটি?
প্রত্যক্ষ মালামাল ও শ্রম
বিক্রয় কমিশন
জ্বালানি শক্তি
কারখানা ভাড়া
35. প্রত্যক্ষ মজুরির শতকরা হারের সূত্রটি লেখ।
প্রত্যক্ষ মজুরির শতকরা হার= অনুমানিক উপরি খরচ/ আনুমানিক প্রত্যক্ষ শ্রমঘন্টা x১০০
প্রত্যক্ষ মজুরির শতকরা হার= অনুমানিক কারখানার উপরি খরচ/ আনুমানিক প্রত্যক্ষ মজুরি x১০০
প্রত্যক্ষ মজুরির শতকরা হার= অনুমানিক উপরি খরচ/ আনুমানিক প্রতাক্ষ মালের ব্যয় x১০০
প্রত্যক্ষ মজুরির শতকরা হার = অনুমানিক উপরি খরচ/ আনুমানিক মূল্য ব্যয় x১০০
36. মুখ্য ব্যয় হলো-
প্রত্যক্ষ মাল + প্রত্যক্ষ শ্রম + উৎপাদন ব্যয়
প্রত্যক্ষ খরচ + কারখানার উপরি খরচ
প্রত্যক্ষ মাল+প্রত্যক্ষ শ্রম+ প্রত্যক্ষ খরচ
উৎপাদন ব্যয় + বিক্রয়
37. What is the function of cores in the casting process?
To support the pattern
To provide differential cooling rates at specific portions
To make holes and cavities
For ease of flow of the molten material
38. FIFO-এর অর্থ কী?
First In, Final Out
First In, First Out
Fast In, Fast Out
Final In, Final Out
39. যন্ত্রঘন্টা হারের সূত্রটি লেখ।
প্রত্যক্ষ মালের শতকরা হার= অনুমানিক উপরি খরচ/ আনুমানিক প্রত্যক্ষ শ্রমঘন্টা x১০০
প্রত্যক্ষ মালের শতকরা হার= অনুমানিক উপরি খরচ/ অনুমানিক যন্ত্রঘন্টা x১০০
প্রত্যক্ষ মালের শতকরা হার= অনুমানিক উপরি খরচ/ আনুমানিক মূল্য ব্যয় x১০০
প্রত্যক্ষ মালের শতকরা হার= অনুমানিক উপরি খরচ/ আনুমানিক প্রতাক্ষ মালের ব্যয় x১০০
40. সরলরৈখিক পদ্ধতির সূত্রটি লেখ।
অবচয়, D= D/N
অবচয়, D= R(C- S)/ (1+R) N
অবচয়, D=(C- S)/N
অবচয়, D= C- N/ S