MCQ
22201. The ultimate strength of cement is provided by [BREB-15]
silica
di-calcium silicate
tri-calcium silicate
tri-calcium aluminate
22202. A first class brick should have a minimum crushing strength of- [BREB-15]
7 MN/m²
10.5 MN/m²
12.5 MN/m²
14 MN/m²
ব্যাখ্যা: ব্যাখ্যা: We know that, A first class brick should have a minimum crushing strength of 10.5 MN/m² Or 105 kg/cm².
22203. The percentage of silica in a good brick clay should very from- [BREB-15; MES-16]
20 to 30%
30 to 40%
40 to 50%
50 to 60%
ব্যাখ্যা: ব্যাখ্যা: Normally, bricks contain the following ingredients-
(i) Silica (sand) -50% to 60% by weight
(ii) Alumina (clay) -20% to 30% by weight
(iii) Lime-2% to 5% by weight.
22204. What is the percentage of silica for 1st class bricks? [MES-16]
55%
65%
75%
50%
ব্যাখ্যা: ব্যাখ্যা: Normally, bricks contain the following ingredients- (i) Silica (sand)-50% to 60% by weight
(ii) Alumina (clay) 20% to 30% by weight
(iii) Lime-2% to 5% by weight.
22205. When first class brick is sunk 24 hours in water how much water will absorbed of its weight? [MES-16]
1/3
1/6
1/4
1/7
ব্যাখ্যা: ব্যাখ্যা: A first class brick shall not absorb more than 8th of its dry weight when immersed in water for 24 hours.
The water absorption capacity for the first class bricks should be under 20%
22206. Cement-এর Efflorescence কী কারণে হয়? [MOCA-19, BBA-20]
Alkali
Iron oxide
Silica
Alumina
ব্যাখ্যা: ব্যাখ্যা: Cement-এ ক্ষারকীয় (Alkalis) দ্রব্যের পরিমাণ বেশি হলে নির্মাণ লোনাক্রান্ত হয় এবং Efflorescence-এর সৃষ্টি হয়।
22207. In vicat's apparatus, the diameter of vicat plunger is- [MES-16]
5mm
15mm
10mm
20mm
ব্যাখ্যা: ব্যাখ্যা: The diameter of vicat plunger is 10 mm and the length of vicat plunger is vicats apparatus varies from 40 to 50 nun
22208. The soundness of cement is tested by-(BREB-15]
air permeability method
Le-chatelier method
Vicat's apparatus
all of these
ব্যাখ্যা: ব্যাখ্যা: The soundness of cement is tested by two methods such as-(i) Le-chatelier method (ii) Autoclave method.
22209. Ordinary Portland Cement-এর Initial setting time- (BPSC-20)
45 minutes-এর কম হবে না
60 minutes-এর কম হবে না
90 minutes-এর অধিক হবে না
120 minutes-এর অধিক হবে না
ব্যাখ্যা: ব্যাখ্যা: Ordinary Portland Cement-এর Initial setting time 30 minutes-এর কম হবে না এবং Final setting time 10 hours-এর বেশি হবে না। কিন্তু National Standards Prescribe অনুসারে Initial setting time 45 minutes-এর কম এবং Final setting time 6.5 hours-এর বেশি হবে না।
22210. সর্বনিম্ন কত মিমি চালুনি দিয়ে অতিক্রম না করলে নমুনাকে কোর্স এগ্রিগেটস হিসেবে ধরা হয়? /BWDB-20]
৪.৭৫ মিমি
২.৩৬ মিমি
২.৪৫ মিমি
৫ মিমি
ব্যাখ্যা: ব্যাখ্যা: ৪.৭৫ মিমি চালুনি দিয়ে অতিক্রম করলে নমুনাকে ফাইন এমিগেট বলে এবং ৪.৭৫ মিমি চালুনি দিয়ে অতিক্রম না করলে নমুনাকে কোর্স এগ্রিগেট বলে।
22211. সিমেন্টে ফাইনাল সেটিং টাইম কত ঘণ্টা? [ RAJUK-17 , BBA-20, ΒΕΡΖΑ-23]
৮ ঘণ্টা
১০ ঘণ্টা
১২ ঘণ্টা
১৪ ঘণ্টা
ব্যাখ্যা: ব্যাখ্যা: সাধারণ পোর্টল্যান্ড সিমেন্টের ক্ষেত্রে প্রাথমিক সেটিং টাইম
৩০ মিনিটের কম নয় এবং ফাইনাল সেটিং টাইম ১০ ঘণ্টা।
22212. The setting time of cement is the governing factor for- [BREB-15]
mixing of concrete
placing of concrete
compaction of concrete
all of these
22213. Cement-এর Consistency test-এ কোনটি ব্যবহৃত হয়?[MOLE-19, BB-20]
Casagrande apparatus
Vicat's apparatus
UTM
Proctor apparatus
ব্যাখ্যা: সিমেন্টের আদর্শ ঘনত্ব (Consistency) পরীক্ষা Vicat apparatus দ্বারা করা হয়। এই apparatus-এর vicat plunger যদি মোল্ডের নিচ থেকে 5mm হতে 7mm পর্যন্ত প্রবেশ করে, তাহলে একে আদর্শ ঘনত্ব বলে।
22214. What is the percentage of strength gain of ordinary Portland Cement after 28 days curing? [MES-06]
50%
60%
70%
80%
ব্যাখ্যা: ব্যাখ্যা: Concrete gain 16 percent strength in one day, 40 percent 3 days, 65% in 7 days, 90% in 14 days and 95- 99% strength in 28 days.
22215. পোর্টল্যান্ড সিমেন্টে সিলিকার পরিমাণ কত?[BW DB-20)
১০-২০%
২০-২৫%
২৫-৪০%
৪৫-৫৫%
ব্যাখ্যা: ব্যাখ্যা: পোর্টল্যান্ড সিমেন্টে সিলিকার পরিমাণ ২২%।
22216. Vicat's apparatus is used to determine the [MES-16]
initial setting time of cement
final setting time of cement
normal consistency of cement
all of these
ব্যাখ্যা: ব্যাখ্যা: Vicat's apparatus is used to determine consitency and initial/final set times of cements and mortar pastes. This unit can be modified for testing to determine false set.
22217. Which is the time range for initial setting time and final setting time for ordinary Portland Cement? [MES-06]
30 minutes-10 hours
20 minutes-8 hours
15 minutes-6 hours
None of the above
ব্যাখ্যা: ব্যাখ্যা: For ordinary portland cement, the initial setting time is 30 minutes and final setting time is 600 minutes (10 hours).
22218. Cement-এর Specific gravity কত?[LGED-19, BBA-20]
২.৬৭
২.১৫
৩.১৫
৩.৫০
ব্যাখ্যা: ব্যাখ্যা: সিমেন্টের Specific Gravity বলতে নির্দিষ্ট আয়তনের সিমেন্টের সাথে সমআয়তনের পানির
অনুপাতকে বুঝায়। পোর্টল্যান্ড সিমেন্টের ক্ষেত্রে তা ৩.১-৩.১৬ gm/cc হয়ে থাকে। তবে আদর্শ
মান ৩.১৫ ধরা হয়ে থাকে।
22219. সিমেন্টের গুণাগুণ নির্ণয়ের কয়টি পরীক্ষা করা হয়?[RAJUK-17, BBA-20
২টি
৩টি
৪টি
৫টি
ব্যাখ্যা: ব্যাখ্যা: পরীক্ষাসমূহঃ
১। সূক্ষ্মতা পরীক্ষা
২। জমাটবদ্ধতার সময় পরীক্ষা
৩। খুঁতহীনতা পরীক্ষা
৪। রাসায়নিক গঠন পরীক্ষা
৫। শক্তি পরীক্ষা।
22220. The bricks should be burnt at temperature from- [MES-16]
300°C to 500°C
500°C to 700°C
700°C to 1000°C
1000°C to 1200°C