সার্ভেয়িং MCQ
সিভিল ডিপার্টমেন্টের "" সার্ভেয়িং "" সাবজেক্টের সকল MCQ এখানে পাবেন। Civil Engineering এর চাকরি প্রস্তুতির জন্য ডিপার্টমেন্ট ও নন-ডিপার্টমেন্টের সকল MCQ এর প্রশ্ন উত্তর ব্যাখ্যাসহ এখানে পাবেন। সহকারী/উপ-সহকারী প্রকৌশলী চাকরি প্রস্তুতির জন্য আমাদের App: Engineering Classroom গুগল প্লে-স্টোর থেকে ডাউনলোড করে নিন। Surveying all MCQ, Civil Engineering MCQ
181. সমতলমিতি প্রধানত কত প্রকার?
২
৫
৬
৯
ব্যাখ্যা: Explained :সমতলমিতি বা লেভেলিং প্রধানত ৯ প্রকার। লেভেলিং প্রধানত দুই ভাগে ভাগ করা যায়- ১. প্রত্যক্ষ লেভেলিং (৬ ভাগ) ২. পরোক্ষ লেভেলিং (৩ ভাগ)
182. বিষুব রেখার সম্মুখ বিয়ারিং ও পশ্চাৎ বিয়ারিং-এর পার্থক্য --
0°
90°
180°
360°
ব্যাখ্যা: Explained: শুধু বিষুব নয় যে কোন রেখার সম্মুখ ও পশ্চাৎ বিয়ারিং ফেজ পার্থক্য ১৮০°।
183. The value of additive constant for the tacheometer varies from-
0 to 15cm
15 to 30cm
30 to 60cm
45 to 60cm
184. The angle between the back tangent and forward tangent of a curve is known as-
deflection angle
central angle
angle of intersection
none of these
185. The reduced level of the plane of ৫ collimation is-height of instrument.
equal to
less than
greater than
none of these
186. কোন বাঁকে সুপার এলিভেশন প্রয়োগ করা কষ্টকর--
যৌগিক
বিপরিত
সরল
সংযুক্ত
ব্যাখ্যা: Explained: বিপরীত বাঁকে সুপার এলিভেশন প্রয়োগ করা কষ্টকর।
187. In leveling, the correction for combined curvature and refraction (in metre) is equal to-
0.00785d2
0.0785d2
0.0112d2
0.0673d2
188. Collimation method is used in leveling.
profile
differential
check
both (a) and (b)
189. In leveling, the correction for curvature (in metres) is equal (D is km)-
0.00785d2
0.0785d2
0.0112d2
0.0673d2
190. সমভলমিতি প্রধানত কত প্রকারের?
১০ প্রকার
৮ প্রকার
৯ প্রকার
৭ প্রকার
191. The length of peg interval for flat curves is-
15m
20m
25m
30m
192. The reduced level of a point on the ground is called-
spot level
spot height
either (a) or (b)
none of these
193. Rise and fall method is used in-leveling.
profile
differential
check
none of these
ব্যাখ্যা:
194. When several contours coincide, it indicates-
a vertical cliff
a valley
a ridge
an overhanging cliff
ব্যাখ্যা:
195. The spacing of cross-sections in a hilly country is usually-
5m
10m
15m
20m
196. The total length of the curve is equal to [R is radius of curve & ◊ is deflection angle)-
πR∅
πR∅/90
πR∅/180
πR∅/360
197. The spacing of cross-sections in a hilly country is usually-
15m
20m
25m
30m
198. The line joning the points having the same elevation above the datum surface, is called a-
contour surface
contour line
contour interval
contour gradient
ব্যাখ্যা: Contour Line: An imaginary live joining the points of the same elevation above the datum surface. Contour Surface: An imaginary line at which every point is located at the same elevation above the datum. Contour Interval: The difference in elevation between successive contour lines on a map. Contour Gradient: The ratio of the vertical height to a specified horizontal distance.
199. The vertical distance between any two consecutive contours is called-
vertical equivalent
horizontal equivalent
contour interval
contour gradient
ব্যাখ্যা:
200. The additive constant for the tacheometer is-
f/i
i/f
f/d
f+d