MCQ
1141. Which of the following is not a source of moulding sand?
Sea
Lakes
Desert
Forests
1142. How is the die used in injection molding cooled?
Oil
Air
Water
Contact with cold surface
1143. নিচের কোন বয়লারটি ফায়ার টিউব?
ল্যাংকাশায়ার বয়লার
ব্যাবকক (Babcock) অ্যান্ড উইলকক্স বয়লার
স্টারলিং বয়লার
ভেলোকস বয়লার
Himalay Sen Sir
মেকানিক্যাল ইঞ্জিনিয়ারিং MCQ
mechanical mcq
মেকানিক্যাল বিগত সালের প্রশ্ন সমাধান
power plant engineering
ব্যাখ্যা: ওয়াটার টিউব বয়লার: যেমন- ল্যামন্ট বয়লার, স্টারলিং বয়লার, বেনসন বয়লার, লোফলার বয়লার, ব্যাব-কক অডি উইলক বয়লার।
ফায়ার টিউব বয়লারঃ যেমন- কেPরান বয়লার, ¯‹P মেরিন বয়লার, ল্যাংকাশায়ার বয়লার, কার্নিশ বয়লার, লোকোমোটিত বয়লার।
1144. নিচের কোনটি কুশন অ্যাডিটিভস-এর উপাদান?
কাঠের গুঁড়া
সিলিকা
সী-করলা
গ্রাফাইট
1145. Where does the granular molding material get loaded into?
Barrel
Hopper
Pellets
Split
1146. Which of the following material is not made by injection molding?
Nuts
Car handles
Tubes
Electrical fittings
1147. In solid casting method, the resin mixture is kept for how much time for hardening and curing?
1-2 hours
2-3 hours
3-4 hours
4-5 hours
1148. হিট এক্সচেঞ্জারের অপর নাম কী?
স্টিম জেনারেটর
কন্ডেন্সার
রিয়্যাক্টর
মডারেটর
1149. The designing of a pattern does not include which of the following feature?
To locate the direction of the parting line and adjust the component accordingly
To determine regions and measurement of draft angles and radii of the sharp edges where allowances are to be given
To recognize and abolish the region of or where the defects could take place during casting
To 3D print the design for making the pattern.
1150. Which of the following factors is not considered in a ram type injection molding?
Inner pressure of material
Outer pressure of material
Volume of material
Temperature of material
1151. What is meant by drag in casting process?
Upper part of casting flask
Molten metal
Lower part of casting flask
Upper and lower part of casting flask
1152. Which of the following pattern making machine makes wooden board?
Jointer
Mortiser
Drill press
Scroll saw
1153. Nitriding process is used to increase surface hardness for which of the following materials?
Alloy steels
Low carbon steels
Medium carbon steels
High carbon steels
1154. ঢালাইলোহার ক্ষেত্রে বালির পারমিয়্যাবিলিটি কত হওয়া উচিত?
20-30.cc/min
40-50 cc/min
30-40 cc/min
50-60 cc/min
1155. What is the minimum pressure allowed to be given to the injection molding process?
90 MPa
140 MPa
100 MPa
170 MPa
1156. কোনটি ফায়ার টিউব বয়লার?
ল্যামন্ট বয়লার
বেনসন বয়লার
কোচরান বয়লার
সবগুলো
Himalay Sen Sir
মেকানিক্যাল ইঞ্জিনিয়ারিং MCQ
mechanical mcq
মেকানিক্যাল বিগত সালের প্রশ্ন সমাধান
power plant engineering
ব্যাখ্যা: ওয়াটার টিউব বয়লার। যেমন- ল্যামন্ট বয়লার, স্টারলিং বয়লার, বেনসন বয়লার, লোফলার বয়লার, ব্যাব-কক অ্যান্ড উইলককক্স বয়লার।
ফায়ার টিউব বয়লার : যেমন- কোচরান বয়লার, স্কচ মেরিন বয়লার, ল্যাংকাশায়ার বয়লার, কার্নিশ বয়লার, লোকোমোটিভ বয়লার।
1157. ফিডওয়াটারের মধ্যে দূষিত বস্তু থাকলে বয়লারের নিচের কী অসুবিধা হয়?
স্তর জমা
ক্ষয়
ভঙ্গুরতা
সবক'টি
1158. The shrinkage allowance for metal casting varies by the type of-
pattern
material
mould
metal
1159. Which of the following non-metallic material is not used in the synthesis of molds?
Magnesite
Zircon
Silimanite
Valcanised rubber
1160. What is the minimum temperature allowed to be given to the injection molding process?
120°C
130°C
140°C
150°C