Image
1.0.0
MCQ
5661. Copper when alloyed with zinc is known as-
Brass
Bronze
Babbits
All of the above
Brass is an alloy of zinc. The composition of brass, generally 66% copper and 34% zinc, makes it a favourable sustitute for copper based jewellery as it exhibits greater resistance to corrosion.
5662. অল্টারনেটরের কোনটি স্থির থাকে?
Field
Armature
Shunt Field
কোনোটিই নয়
ব্যাখ্যা: অল্টারনেটরের আর্মেচারকে স্থির রেখে ফিল্ডকে ঘুরানো হয়।
5663. The term ampere-hour (Ah) is associated with-
rectifiers
transformer
electromagnets
storage cells
An ampere-hour (Ah) or sometimes amp-hour is the amount of energy charge in storage cells or battery that will allow one ampere of current to flow for one hour.
5664. The shunt generator gives its greatest voltage at
no load
full load
half-load
quarter load
With the increase of load the armature voltage drop, as a result the output voltage of shunt generator drops slightly. So at no load condition there is no armature voltage drops and greatest output voltage is found.
5665. যদি একটি ইন্ডাকশন মোটরের লাইন ভোল্টেজ এর নির্ধারিত ভোল্টেজের ৭৫% হ্রাস করা হয়, তবে এর স্টার্টিং কারেন্টও হ্রাস পাবে-
১৫%
২৫%
৫০%
৭৫%
5666. The ideal de generator is one that has ---voltage regulation
low
zero
negative
positive
Ideally DC generators should have zero voltage regulation Any increase in load current caveses an increase in the field and hence the terminal voltage rise. Hence it has negative voltage regulation and it has the poorest voltage regulation.
5667. A de motor is still used in industrial application because it
is cheap
is simple in construction
provides tine speed control
none of the above
DC motor is populer in industrial application because it provides fine speed control with adjustable speed and constant or low speed torque.
5668. The emf of a cell does not depend upon
nature of electrolyte
concentration of electrolyte
nature of material of electrodes
size and spacing of electrode
EMF of cell is- - Directly proportional to the distance of separation between the two electrodes. -Inversly proportional to the area of electraodes dipped in electrolyte. - -Inversly proportional to the temperature of electrodes. -Inversaly proportional to the concentration of electrolyte
5669. Shunt are generally made of-
copper
aluminium
silver
manganin
Most shunts are made from maganin, an alloy that is 84% copper, 12% magnesium and 4% nickel .
5670. pole de machines are most common.
2
4
6
8
5671. The greatest heat loss in a de machine is due to loss.
eddy current
hysteresis
copper
friction
Copper loss of de machine is PR. If current flow is increase then copper loss will increase, simultanensly more heat will be produce.
5672. The demand for a large increase in torque of a de series motor is met by a-
large decrease in current
large decrease in speed
large increase in speed
large increase in speed
5673. The current in armature conductors of a de machine is
pure de
pulsating de
ac
pure de + pulsating de
In DC generatora, varying conduction cuts the fixed magnetic field then emf will be induced that will be in the form of AC but not DC
5674. একটি তিন ফেজ ইন্ডাকশন মোটর কোন ধরনের ম্যাগনেটিক ফিল্ড উৎপন্ন করে?
স্টেডি
অল্টারনেটিং
রোটেটিং
কোনোটিই নয়
ব্যাখ্যা: তিন ফেজ ইন্ডাকশন মোটর সাপ্লাইয়ের সাথে সংযোগ করলে এতে রোটেটিং ম্যাগনেটিক ফিল্ড সৃষ্টি হয়।
5675. Motors used in high-speed applications have-
high torque with high speed
low torque with high speed
high torque with low speed
none of the above
DC Differentially compound motor has low starting torque and has a constunt speed, but the dangerously high speed at no load under the circumstunce it is seldom used.
5676. The direction of a rotation of a de motor can be determined by
Lenz's law
Fleming's left-hand rule
Fleming's right-hand rule
Ampere's law
Fleming's left hand rule is mainly applicable to electric motors and Fleming's right hand rule is mainly applicable to electric generator.
5677. একটি transformer-এর truns ratio 50:120. Transformer-এর secondary current 100A হলে Primary Current কত?
50A
240A
600A
1200A
5678. A de motor can be looked upon as de generator with the power flow-
Reduced
reversed
increased
modified
A de motor can be looked upon as de generator with the power flow reversed.
5679. The armature of a de machine is laminated in order to reduce-
eddy current loss.
hysteresis loss
copper loss
friction loss
In electric machine to reduce eddy current loss we may use laminated core or selecting magnetic core materials that have low electrical conductivity.
5680. Transformer-এর কাজ কী?
বিদ্যুৎ উৎপাদন
কারেন্ট বাড়ানো
ভোল্টেজ পরিবর্তন করা
বৈদ্যুতিক শক্তির পরিবর্তন
ব্যাখ্যা: Transformer-এর কাজ হলো আপাত পাওয়ার ও ফ্রিকুয়েন্সিকে অপরিবর্তিত রেখে ভোল্টেজকে আপ বা ডাউন করা।