Image
1.0.0
MCQ
7261. If, line frequency is 50 Hz, then output (Hz) of a bridge rectifier is-
25
100
50
None
ব্যাখ্যা: Output frequency of bridge rectifier is twice the input frequency. Full wave bridge rectifier, 25,2x50=100H
7262. ডিজিটাল রেকর্ডার কত প্রকার?
৩ প্রকার
২ প্রকার
৪ প্রকার
৫ প্রকার
7263. Class-B power amplifier- miximum collector efficiency কত %
25
78.5
50
60
7264. An alternating current is converted to direct current by-
dynamo
rectifier
transformer
motor
ব্যাখ্যা: A rectifier is a device which converts ac (alternating current) to de (direct current) which flows in only one direction. This process is know as rectification.
7265. 2B. If PIV rating of a diode is exceeded-
the diode stops conduction.
the diode is destroyed.
the diode conducts heavily in the forward direction.
nothing happens.
ব্যাখ্যাঃ It is the peak inverse voltage rating (PIV) of a diode. When the voltage applied to a doide is more than PIV, it is likely to result in breakdown at the junction and the diodes gets destroyed.
7266. Process of adding impurities to semiconductor is called-
mixing
refining
diffusing
doping
ব্যাখ্যা: The process of adding controlled inpurities to a semiconductor is known as "doping" The amount of impurity, or dopant, added to as intrinsic (pure) semiconductor varies its level of conductivity.
7267. A transistor amplifier is desired to have-- input impedance and --output imperdance.
low, high
high, high
high, low
low, low
ব্যাখ্যা: A transistor amplifier is desired to have low input impedance and high output impedance.
7268. Suppose you are checking a 50 Hz full-wave bridge rectifier and observe that output has a 50 Hz ripple, then-
circuit is working properly.
trnsformer secondary is shorted.
there is an open diode.
the filter capacitor is leaky.
7269. At absolute zero temperanre (-273°C), an intrinsic semiconductor has-
a few free electrons.
many holes.
many free electrons.
no holes or free electrons.
ব্যাখ্যা : At absolute zero temperature (-273°C), an intrinsic semiconductor has no holes or free electrons.
7270. লোড সেল কেন ব্যবহার করা হয়?
পাতলা বস্তু মাপার জন্য
বস্তুর ব্যাসার্ধ মাপার জন্য
ভারী বস্তু মাপার জন্য
বস্তুর দৈর্ঘ্য মাপার জন্য
7271. At what relgon a transistor operates --
Artlive
Saturatioit
Cut off
None
7272. What is the full name of LCD?
Light control diode .
Light crystal display.
Liquid crystal diode.
Liquid crystal display.
7273. A pn junction acts as a-
unidirectional switch.
bidirecctional switch.
controlled switch.
both unidirectional and bidirectional.
ব্যাখ্যা : The PN junction is conduct with forward bias only. It means they conduct in only one direction (Current flows from P to N). That's why PN Junction acts as unidirectional switch.
7274. The primary function of a centre-tapped transformer in a power supply is to-
step up the voltage.
step down the voltage.
cause the diodes conduct alternately.
may step up or step down the voltage.
ব্যাখ্যাঃ The primary function of a centre-tapped transformer in a power supply is to step down the voltage.
7275. When the light increase, the reverse current in a photodiode-
increases
is unaffected
decreases
sometimes increases and sometimes decreases
ব্যাখ্যা : When the light increases, the reverse current in a photo-diode increases. Because, in a photodiode the electricity flow is directly converted into light.
7276. The arrow in the symbol of a transistor indicates the direction of-
electron current in the emitter.
electron current in the collector.
hole current in the emitter.
donor ion current.
ব্যাখ্যাঃ The arrow in the symbol of transistor indicates the direction of hole current in the emitter.
7277. RTD-এর সেনসিং এলিমেন্ট হিসেবে কোন পদার্থ বেশি ব্যবহৃত হয়?
তামা
দস্তা
প্লাটিনাম
লোহা
7278. Half-wave rectifier- maximum efficiency--%
25
50
40.6
81.2
7279. The energy band in which free electrons exist is--
first band
conduction band
second band
valence band
ব্যাখ্যা: The electrons occupying this band are called conduction electrons and the band is called the conduction band this band may be empty or partially filled. In this band, electrons move freely.
7280. Which one is the smallest region in a transistor?
base
collector
emitter
both (a) and (b)
ব্যাখ্যা: The base region of a BJT transistor is very thin and is lightly doped with current carries. It is the region of a transistor which has opposite polarity charge carries from the emitter and the collector regions.