ট্রান্সপোর্টেশন ইঞ্জিনিয়ারিং MCQ
141. In coning of wheels, the wheels are given a slope of-
1 in 20
1 in 25
1 in 30
1 in 40
142. The largest dimension of a rail section is-
head width
height
foot width
all of these
143. কেন্দ্রাতিগ অনুপাত রেলসড়কে কত? [BBA-23]
১/৪
১/৮
১/৬
১/১০
144. To prevent the change in gauge and creep, the steel sleepers are fixed by clips, bolts and-
one key
two keys
three keys
four keys
145. The number of sleepers used per rail length on the track is known as-
sleeper strength
sleeper density
sleeper ratio
all of these
146. The main device used for interlocking is-
point lock
detector
treadle bar
all of these
147. The width of top portion of a flat- footed rail is-
66.67mm
73.25mm
69.80mm
75.87mm
148. The minimum depth of ballast for broad gauge tracks on Indian railways is-
200mm
300mm
250mm
350mm
149. Which of the following is a cast-iron sleeper?
box sleeper
pot sleeper
plate sleeper
all of these
150. কোন ধরনের রেলপথ সবচেয়ে চওড়া? [BPSC-22]
Narrow Gauge
Broad Gauge
Mitre Gause
Mix Gauge
151. The track from which train diverts is known as-
turn-out
crossing track
main line
point
152. The rail seat is given a slope of-
1 in 20
1 in 40
1 in 10
1 in 30
153. Round spikes are not used for fixing --- rails on wooden sleepers.
flat footed
double headed
bull headed
all of these
154. The gauge is widened on curves of -----4.5° curvature.
equal to
less than
more than
infinity
155. To keep the railway yard dry, the ballast used is-
sand
coal ash
broken stone
both a and b
156. The best wood for sleepers is-
sal
teak
deodar
chir
157. The mass of a rail chair is about-
10kg
22kg
15.6kg
30kg
158. Creep is the----- movement of rails.
longitudinal
lateral
vertical
159. A track is laid over-
sleepers
rails
formation
ballast
160. Superelevation on curves is provided by means of-
cant-board
spirit level
straight edge
all of these