MCQ
4241. The degree of grinding of cement is called-
fineness
impact value
soundness
bulking
4242. The average out-turn of first class bricks in clamp burning is about-
50%
60%
70%
80%
4243. The strength of concrete using air entraining cement gets reduced by-
5 to 10%
10 to 15%
15 to 20%
20 to 25%
4244. দুটি বালির নমুনার ওজন ও FM যথাক্রমে 500 গ্রাম ও 750 গ্রাম এবং 2.5 ও 2.2 হলে তাদের Combined FM কত হবে? [BPSC-20]
2.4
2.38
2.42
2.32
ব্যাখ্যা:
ব্যাখ্যা: Combined, FM=(F1m1+F2m2)/(m1+m2)
=(500*2.5+750*2.2)/(500+700)
=2.32
4245. The percentage of alumina in a good brick clay should vary from-
20 to 30%
30 to 40%
40 to 50%
50 to 60%
4246. The frog of a brick is normally made on its-
longer face
bottom face
shorter face
top face
ব্যাখ্যা: ব্যাখ্যা: ইটের যে-কোনো একপাশে খোদাইকৃত বা কোম্পানির নাম সংবলিত অংশকে ফ্রগ বলে।
4247. ASTM No. 16 সিভের ওপেনিং সাইজ কত মিমি? [BWDB-20]
১.১৮ মিমি
১.৪০ মিমি
২.৩৬ মিমি
১.৭০ মিমি
কোনোটিই নয়
ব্যাখ্যা: ব্যাখ্যা: ASTM No.-4 size seive-এর Opening 4(4.75mm), No. 6(3.35), 8(2.36mm), 10(2.00mun), No.
12(1.70mm), 16(1.18mm)/
4248. একটি উত্তম ইট ২৪ ঘণ্টা পানিতে ভিজালে তার ওজনের কত অংশ পানি শোষণ করবে? (R&11-06: MODMR-06: RAJUK-17; DSCC-17; MOEF-19; DWASA-201]
১/৬ অংশ
১/৭ অংশ
১/৩ অংশ
১/৪ অংশ
ব্যাখ্যা: ব্যাখ্যা: ইট পানিতে ভিজিয়ে রাখলে এটি এর নিজস্ব ওজনের ২০% বা ১/৬ অংশ পানি শোষণ করে।
4249. The burning of bricks in kilns is completed within-----hours.
12
24
48
96
4250. ১ম শ্রেণির ইট ২৪ ঘণ্টা পানিতে ডুবিয়ে রাখলে শোষিত পানির পরিমাণ ইটের শুকনো ওজনের শতকরা কত ভাগের অধিক হবে না? [BPSC-20]
10%
15%
20%
25%
ব্যাখ্যা: ব্যাখ্যা: ১ম শ্রেণির ইট ২৪ ঘণ্টা পানিতে ডুবিয়ে রাখলে তার নিজের ওজনে ১/৬
অংশ বা ২০% এর বেশি পানি শোষণ করতে পারবে না।
4251. The natural drying of bricks is also called back drying.
true
false
4252. উন্নত মানের বালু কখনোই ----থেকে আহরিত হয় না। [PPA-20]
নদী
নালা
সাগর
চর
ব্যাখ্যা: ব্যাখ্যা: বালু সাধারণত গর্ত, নদী ও সাগর হতে সংগ্রহ করা হয়ে থাকে। তবে নালা হতে কখনোই সংগ্রহ করা হয় না, কারণ নালার বালিতে প্রচুর পরিমাণ ময়লা থাকে এবং পলি জমা থাকে।
4253. For the construction of retaining walls, a------stone must be used.
soft
hard
heavy
light
4254. The inert mineral material used for 01-themanufacture of mortars and concrete is-
cement
aggregate
water
admixture
4255. The average out-turn of first class bricks in kiln burning is-
50 to 60%
60 to 70%
70 to 80%
80 to 90%
4256. Pozzolana is essentially a silicious material containing clay upto-
20%
40%
60%
80%
4257. The size of mould for bricks should be---- the specified size of the bricks.
equal to
double
smaller than
larger than
4258. The percentage of water for making a cement paste of normal consistency varies from-
15 to 25%
25 to 35%
35 to 50%
50 to 60%
4259. Initial setting time of ordinary Portland cement is-
15min
30min
60min
10hour
4260. For reinforced concrete, the aggregate used is-
sand
grave
crushed rock
all of these